[NukeNet] Kashiwazaki-Kariwa Control Rod Stuck

[Citizens' Nuclear Information Center]

http://www.asahi.com/english/Herald-asahi/TKY200710180375.html

Control rod stuck at nuclear plant

10/19/2007
THE ASAHI SHIMBUN

A control rod at the Kashiwazaki-Kariwa Nuclear Power Plant in Niigata 
Prefecture remains stuck, raising concerns that the July 16 earthquake 
may have distorted the shape of a key area in the reactor, officials 
said Thursday.

Operations at the Tokyo Electric Power Co. (TEPCO) plant have been 
suspended since the 6.8 magnitude temblor hit, causing a fire and 
considerable damage to the facilities.

The new finding about the control rod, a crucial component in a 
reactor's operations, is likely to further delay a resumption of plant 
operations.

Since the rod is still in the fuel, and is being kept in place with 
support devices, there are no immediate safety concerns, company 
officials said.

TEPCO officials said that all 205 control rods at the No. 7 reactor 
were automatically inserted into the fuel to stop nuclear reactions 
right after the earthquake hit.

In an emergency at the reactor, pressure is applied from the bottom of 
the reactor so that the 4-meter-long rods are inserted into the fuel 
assembly.

The rods are made of material that absorbs neutrons, which are crucial 
in starting nuclear fission.

Checks are continuing on how the plant's facilities were affected by 
the earthquake.

At the No. 7 reactor, the lid of the pressure vessel was removed to 
transfer the fuel to a pool adjacent to the reactor.

Since Oct. 11, control rods have been raised from the fuel for checks.

The No. 7 reactor is the first at the plant to have its lid removed 
since the earthquake.

On Thursday, workers found that one of the rods could not be moved. So 
far, 106 rods have been extracted, according to TEPCO.

Company officials said that one reason could be that devices intended 
to prevent the rod from slipping remained intact.

Another possibility is that the temblor distorted the shape of the 
facility, preventing the rod from moving.

Checking the exact cause is likely to take time since water that fills 
the reactor must be drained before an inspection of its 
interior.(IHT/Asahi: October 19,2007)

International Liaison
Citizens' Nuclear Information Center
2F-B Akebonobashi Coop, 8-5 Sumiyoshi-cho, Shinjuku-ku,
Tokyo, 162-0065, Japan
Phone: +81-3-3357-3800		Fax: +81-3-3357-3801
Email: white at cnic.jp		Web: http://cnic.jp/english/